BOE IPC 2026: Dual Four-Primary LCD, Crease-Free OLED and a 7 mm Micro LED Wall
At its partner conference in Beijing BOE put a 130% BT.2020 LCD, an 8K/240Hz switchable monitor, a flexible OLED with sub-100 µm crease depth and a 135-inch Micro LED wall on the same stage. The direction is clear: LCD is not standing still.
The ADS Pro line-up answers a question monochrome module makers watch closely: how much life is left in LCD. The 85-inch RGBX Ultra TV uses a dual four-primary architecture — four primaries in the panel plus four in the backlight — with colour conversion algorithms to reach 130% of BT.2020. A 31.5-inch 8K UB Cell switches between 8K at 120 Hz and 4K at 240 Hz.
On the flexible side, BOE showed an OLED whose crease depth stays below 100 µm, with crease slope down about 60% and mechanical strength up 50%, surviving more than 50,000 folds at -40°C and carrying an SGS flatness certificate. A TSF wide-gamut OLED became the first in China's display industry to obtain Pantone colour certification.
For Micro LED the 135-inch P0.7 module reaches 3,000 nits at 7 mm thickness, and an 18-inch 240 Hz Mini LED unit debuts BLMB technology aimed at motion blur. Also announced: 2.88 m² perovskite PV modules passing TÜV Rheinland IEC 61215/61730, and glass-substrate TGV packaging for HPC chips.
Why it matters downstream: when panel makers push colour gamut and uniformity this hard at the top end, the same specifications gradually become table stakes in industrial and automotive modules a tier below. Buyers who lock colour targets and tolerances in writing now avoid re-specification later.
